Since 1879
Hygiene Ventile von Rieger

Control or Modulating valve - hygienic

 

 

RIEGER control or modulating valves  are especially convincing in food sector, but also in the pharmacy by strength and durability. This is based on the flow control cones with O-ring sealing which ensure uninterrupted production processes and product safety.

Longer production cycles mean lower maintenance costs and higher productivity.

On the product side, the control valves are equipped with metal control cones. The control behavior (Kv values) can be customized to your processes on site. For this we need as a basis for calculating the desired Kv values at 50 % and 100 % (= Kvs or Cvs) valve opening.

Note:
Kv = Cv x 0,86


Cv = Kv x 1,16

Because of the modular system is a change of the actuators between – manual (DN 10-100 or 3/8"-4") or pneumatic with positioner (DN 25-100 or 1"-4") – always possible.


 

  • Right angle type L
  • Double right angle type T
  • Cross type TT

Recommended Bürkert positioner with (0) 4-20 mA
 

  • Bürkert 8692 WITH display and control buttons for programming directly to the valve (M12) see Bürkert 0227301
   
   
  • Bürkert 8694 WITHOUT display or control buttons for programming directly on the PLS/PC (M12) see Bürkert 0227417
 
  • Bürkert 8694 WITHOUT display or control buttons for programming directly on the PLS/PC (grommet) see Bürkert 0227411
Construction of the valve massive valve housing
no dead spaces
completely draining
many possible installation orientations
   
Absolute product protection perfect isolation from the environment
no sump , no dome
   
Serviceability seal replacement without special tools
low downtime
screwed bellows
perfectly cleanable
   
Efficiency long lifetime of PTFE bellows
standard seals
minimal maintenance costs
   
Additional certificates in 3-A-design possible
   
     
with PTFE-Bellow (aseptic)   with O-Ring (hygienic)
Material product contact optional not product contact 1.4404/AISI316L
1.4435/AISI316L
1.4301/AISI304
     
Seals  O-rings/gaskets EPDM
     
Temperatures maximum   EPDM
  operating temperature

sterilisation temperature
 
  130 °C*

150 °C* short-time (approx. 20 min)
       
Operating pressure closing pressure

control air pressure
 
max. 6 bar
 
min 6 bar -
max. 10 bar
     
Surfaces product contact
optional


not product contact
Ra <= 0,8 µm
e-polished, other surfaces on request
Ra <=1,6 µm
     
Connections Standard- pipe classes DIN 11850-R2 (DIN 11866 A)
O.D.-Tube (DIN 11866 C)
DIN EN ISO 1127 (DIN 11866-B)





Bookmark and Share
 
RIEGER NEWS
In honorable memory of our founder, Senator Henry Ehrenberg, who will mark his 100th birthday on April 26th














... more
Gebr. Rieger GmbH & Co. KG
Kochertalstraße 32
73431 Aalen - Germany

Tel.: +49 (0) 7361 - 5702-0
Fax: +40 (0) 7361 - 5702-51

info@rr-rieger.de
 
Sprachen/Languages
Deutschland            
         
  mexican        
             
© Copyright - All rights reserved
Gebr. Rieger GmbH & Co. KG
TO THE TOP  Nach oben

Impressum 

Sitemap


                              Kandetzki werbung internet kommunikation